MECHANICAL� LAND DRILLING� RIG
| DRAWWORKS | National T-45� double drums, 550 HP, air operated controls, automatic cathead and 22" built-in single hydromatic brake, automatic driller, Foster makeup and breakout catheads, compound driven. |
| COMPOUNDS | National Model CH-S, three engines with two 500 HP pump drives |
| RIG POWER | Three (3) Caterpillar D-353 diesel engines, rated at 375 HP each continuous.� Driving through National Model C245-80 Torque convertor. |
| MAST | Lee C. Moore Model 27197.� 131 ' X 17'3" wide, rated capacity 550,000 lbs.. Racking capacity 10,000 ft. of 4-1/3" drill pipe. Complete with monkey board, stabbing board and racking platform.� |
| CROWN BLOCK | Lee C. Moore five (5)� 42" diameter sheaves
for 1-1/8" line.
One (1) 56" X 1-1/8" fast line sheave. |
| CROWN-O-MATIC | One (1) each� Stewart and Stevenson Model T.C.B. Crown-O-Matic safety stop. |
| DRILLING LINE | 5,000 ft. of 1-1/8"� 6 X 19 IWRC RH Reg lay. |
| SUBSTRUCTURE | Lee C. Moore� 14 ft. high X 21 ft. wide X 44 ft. 10" long, casing capacity 325,000 lbs, set back capacity 192,000 lbs. |
| ANCHOR | Lee C. Moore clamp type wireline anchor. |
| SAND LINE UNIT | Built into drawworks as part of the cathead assy, grooved for 9/16" line come with 10,000 ft. of 9/16" IWRC RH lay sand line. |
| TRAVELLING EQUIPMENT | Block� : Oilwell 66 rated 250
ton c/w 5 each 36" sheaves.
Hook� :� Byron Jackson Model 4200. Rated - 250 ton. Swivel : Continental Emsco Model LA-200.
Rating 200�
Links� : One (1) set of B.J. links 108" long 2-3/4"� O.D. |
| ROTARY TABLE | Oilwell 20-1/2"� - 350 ton rating. |
| MASTER� BUSHING | One (1)� Varco 20-1/2" Model MSS� c/w #101 insert bowl |
| KELLY BUSHING | One (1) set Baash Ross Model 2 RSC4 c/w 4-1/4" square drive roller assy. |
| KELLY | Two (2) 40' Kellys 4-1/4" square with 6-5/8" L.H. Regular box and 4-1/2" F.H. pin. |
| KELLY HOSES | One (1) - 3" I.D. X 55 ft. long 5,000 PSI working pressure |
| STANDPIPE | One (1) 4-1/2" c/w 4 each� 4" Demco H.P. valves and 5 each 2" H.P. valves.� Rated 3,000 PSI |
| H.P. HOSES | Two (2)� 3" X 15 ft. Shock hoses 5,000 PSI working pressure |
| MUD PUMPS | One (1) Emsco DA-500 7-1/2" X 16" with 500
input H.P., compound driven.
One (1) Emsco D-500 7-1/2" X 16" with 500 input H.P., compound driven. |
| PULSATION DAMPNER | Two (2) Hydril K-20-3000, on mud pumps. |
| SAFETY VALVES | Two (2) each Cameron 2" type 'B' Reset relief valves. Rated 1,500 PSI to 5,000 PSI, one on each pump. |
| MUD TANKS | One (1) Shaker tank 36 ft. L. X 10 ft. W.
X 4 ft. H. Volume 170 bbls come with built in trip tank pump assy.
One (1) Intermediate tank 30 ft. L. X� 8 ft. W. X 4 ft. H.� Total volume 160 bbls. One (1) Suction tank c/w fill tank 30 ft. L. X 8 ft. W. X 4 ft. H.� Total volume 160 bbls. Note
|
| TRIP TANK | 40 barrel tank c/w one 3" X 2" Centrifugal pump powered by a 5 HP electric motor.� Trip tank and pump unit built into the shaker tank.� Complete with remote control at drillers console. |
| LOW PRESSURE MIXING PUMP | Mission 5" X 6" Centrifugal pump with unitized manifold c/w a 75 HP G.M. diesel motor. |
 |
 |
 |